Top 10 Best Rockville Subwoofer 2022 – Review & Guide

• Features of RG212CA v2: Rockville RG212CA v2 Dual 12″ Slim Vented Powered Car Subwoofer Enclosure, Complete all in one system includes a built-in amplifier, top quality enclosure, and dual 12” subs, Vinyl finished enclosure with side vents tuned to 40Hz, Enclosure is built with ¾” MDF and is ribbed and braced, 2000 Watts Peak power output, 500 Watts RMS, 12“ Super-Slim Subwoofer, Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement, 3D Molded Acrylic Dust Cap, Expanded & Rolled Steel Basket
• High-Density Laminated Rubber Surround, High Power Strontium Magnet with Ultra Saturated High BL Motor Structure, Vented Core Magnet Motor Structure, 2” High-Temperature Aluminum Voice Coil, 8 mm Washer & Yoke Plates, 13.6 mm Peak-to-Peak X-Max, 40 oz. Magnet, Slim Vented MDF Enclosure Design, Impedance: 4-ohms, Frequency response: 30Hz-500Hz, SPL @ 1w/1m: 89dB, Dimensions: 29.52″ Length x 15″ Height 4.37″ Top Depth x 6.65″ Bottom depth, Unit Weight: 40.12 Lbs

• Amp Features:

• Built-in 500 Watts RMS / 2000 Watt Mono Block Amplifier, 2 Ohm stable amplifier, Class D amplifier, Extruded aluminum heatsink stays cool even at high volumes, 200mV – 5V Variable Input Level
• 12dB Low Pass Crossover Frequency 50Hz-200Hz, Low-Level RCA Inputs, Remote level attenuation: 0 to -32.2 dB, 3.7-second turn-on delay, High-Level Speaker Level Input with Auto Start Music Sense, RJ11 Jack for Dash Mounted Bass Remote

• Rockville Rws12ca slim 1200 Watt 12″ Amplified powered car Subwoofer Enclosure.
• 1200 watts peak power output. 300 watts RMS. 12″ Super slim subwoofer.
• Ultra-stiff composite pulp cone with Kevlar reinforcement. 3D molded acrylic dust cap. Expanded & Rolled Steel basket.
• High-density laminated foam Surround. High power strontium magnet with ultra Saturated high BL motor structure.
• Vented core magnet motor structure. 2″ High-temperature aluminum voice coil. 8mm washer & yoke plates. 13.6mm Peak-to-Peak x-max. 70oz.
• Magnet motor structure. Super slim sealed MDF enclosure design. Aviation grade black tweet Carpet with embroidered logo.
• Black texture synthetic Leather front panel. Impedance: 4-ohms. Frequency Response: 38hz-500hz. Spl @ 1W/1M: 96Db.
• Dimensions: 24″ Length x 15″ Height 4.37″ Top depth x 6.65″ Bottom depth. Built-in 300 watts RMS/ 1200 Watt mono block amplifier.
• 150Mv – 5V variable input level. 24Db low Pass Crossover frequency 50hz-250hz. Low-level RCA inputs.
• High-level speaker level input with auto starts music sense. RJ11 jack for the dash-mounted bass remote.

• Rockville RV10. 2B 1000w Dual 10″ Car Subwoofer Enclosure+Mono Amplifier+Amp Kit
• Rockville RV10. 2B Dual 10” Bass Enclosure System With matching Mono Block Amplifier. 1000 Watts Peak Power / 350 Watts RMS CEA-2031 Rating. Dual 10” Bass Enclosure System with matching Mono Block Amplifier. Quasi Transmission Line Cabinet Design. Bonded, Stapled, and Braced 3/5″ MDF Cabinet. Computer Designed, Under-Side Bass Reflex, Aero-Port System.
• Angled at 15% for near-perfect in-vehicle bass alignment. Exterior: High-quality aviation-grade tweed carpet. Oversize Rockville Shield Embroidery. Mono, gold-plated push style, speaker terminal. Dual, High-Power, High-Efficiency 10″ Subwoofers. Injection Molded, Talc Filled, Brushed Polypropylene Cones

• 1200 Watts Peak Power

• Power Output: 200 Watts RMS CEA-2006 Power @ 4-ohm and 97dBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz – 20KHz (-3dB). RMS Power: 400 Watts @ 2 ohms. 4 Ohm Mono-Block Class A/B.
• High-Speed MOSFET Power Supply with 50 Volt Rail. BiPolar Audio Transistor Output Section. RCA Line Input. RCA Line Output – Full Range. High-Level Speaker Line Input. OEM Integration Auto-Start Turn On Circuitry. Dashboard Bass Remote Control with Cable

• Package Includes (1) Rockville RW10CA 10″ 800W Slim Amplified Car Subwoofer. (1) Rockville RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA
• Features of RW10CA: Rockville RW10CA 800 Watt 10” Slim Car Subwoofer. 800 Watts Peak / 200 watts RMS. PWM MOSFET Power Supply. Low-Level RCA Input. High-Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit. Phase Switch: 0° or 180°. Low Pass Filter: 50Hz – 150Hz. Bass Boost: 0 – 18dB @ 45Hz.
• Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz. Details:. . Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches. Frequency Response: 20Hz – 150Hz. Sensitivity: 90dB @ 1w / 1m

• Features of RWK10

• Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High-Grade Twisted Pair of 100% Copper RCA Cable. 17′ 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. And, 17 16 Gauge Clear Speaker Wire. 3′ 10 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 40 Amp ATU Inline Fuse. 7 Split Tube Loom.
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion-proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

• Features: Rockville Rock Shaker 10 Black 600 Watt Powered 10″ Home Theater Subwoofer, 600 Watts Peak / 300 Watts RMS, Built-in Class D Amplifier, Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board), High-grade vinyl enclosure covering with a beautiful finish, The enclosure is built with the perfect air space to maximize sound quality and punch, The rear-firing port is engineered for optimal sound
• Class “D” Amplifier Circuitry with Auto-Switching Power Supply, High-grade woofer with foam surround and paper cone, Woofer has a Y30 grade magnet and 1.5” 4-layer voice coil, Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!, Enclosure is filled with fire-resistant poly cotton, Detachable foam grill
• Inputs / Outputs / Controls: RCA line input, RCA line output, Speaker High-level inputs, Speaker High-level outputs, Volume control, Phase switch (0°-180°), Crossover Frequency control, Power switch, Standard IEC power cable included

• Specifications

• Amplifier: Class D, Woofer Impedance: 4 Ohm, Signal to noise ratio: 85 dB (Maximum output with THD+1<1%, A-weight), THD: 1%, INPUT sensitivity: 88dB +/- 2dB, Frequency Response: 20 Hz – 200 Hz, 600 Watts peak output, 300 Watts RMS output, Voltage: 110-240V, Product Dimensions in Inches: (W*H*D): 12.6” x 15.5” x 16.5”, Shipping Dimensions in Inches: (W*H*D): 15.7″ x 19.7” x 18.5”, Unit Weight: 20 LBS, Shipping Weight: 24.5 LBS, Color: Black
• The rear side of the subwoofer: Subwoofer (LINE) Jack in, Subwoofer (LINE) Jack out, Volume Control, Phase switch (0° – 180°), Frequency control, Power switch, Speaker high level in, Speaker high level out??

You may get here also: Best OEM Earphones

Top 10 Best Sennheiser

10 Best IHome Speakers For iPhone

• (2) Rockville SBG1154 15″ 800 Watt Passive Pro DJ Subwoofers w/ MDF Cabinet and Pole Mount. 15 Pro audio woofer. 400 Watts RMS / 600 Watts Program / 800 Watts Peak
• 3 High-temperature aluminum voice coils. 70 oz magnet woofer. Ported Enclosure for Improved Bass Response. Construction: High-Density, High-Quality Non-Resonant MDF wood – Stapled, Bonded & Braced
• Ergonomic Recessed Handles. Molded Steel Grill. Aviation Grade Black Carpet. Pole Mount. Rubber Isolating Feet. Binding Post / Banana Plug Terminals (Negative/Positive). 1/4″ Jack (In/Out)
• SpeakON (In/Out). All input/output connections are internally connected in parallel. Nominal Impedance: 4 Ohm. Sensitivity: 94dB @ 1w/1m. Frequency Response: 20Hz – 500Hz
• Dimensions (W x D x H): 18 x 17 x 20. Weight: 44 lbs

• Rockville RW10CA 800 Watt 10″ Slim Car Subwoofer.
• 800 Watts Peak / 200 watts RMS. PWM MOSFET Power Supply.
• Low-Level RCA Input. High-Level Inputs with Auto Turn-On Technology.
• Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
• Thermal Protection Circuit, Short Protection Circuit.
• Overload Protection Circuit. Phase Switch: 0° or 180°.
• Low Pass Filter: 50Hz – 150Hz. Bass Boost: 0 – 18dB @ 45Hz.
• Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz. Frequency Response: 20Hz – 150Hz. Sensitivity: 90dB @ 1w / 1m.
• Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches.
• Note: Kindly refer to User Manual before use

• Package Includes: (1) Rockville USS10 10″ 800w Slim Under-Seat Active Car/Truck Subwoofer Sub, (1) Rockville 10 Gauge Amp Wire Kit ANL Fuse Holder 100% Copper RCA
• Features of USS10: Rockville USS10 800 Watt 10” Slim Car Subwoofer, 800 Watts Peak / 200 Watts RMS, PWM MOSFET Power Supply, Low-Level RCA Input, High-Level Inputs with Auto Turn-On Technology, Adjustable Input Sensitivity, Soft Delayed Remote Turn-On, Thermal Protection Circuit, Short Protection Circuit, Green Power/Red Protect LED, Phase Switch : 0° or 180°, Low Pass Filter: 50Hz – 150Hz, Bass Boost : 0 – 12dB @ 45Hz, Subsonic Filter: 20Hz – 50Hz, THD < 0.15%, Subwoofer Level Remote Control

• Fuse Rating

• Single 25A. Details of USS10: Maximum Power RMS : 200 Watts, Impedance : 2 Ohm, Dimensions : 15 x 10.89 x 2.9 (L x W X H) Inches, Frequency Response : 15Hz – 125Hz, Signal to Noise Ratio >82dB, Sensitivity: 90dB @ 1w / 1m, Input sensitivity : RCA level 195mV, Input sensitivity : HIGH level 5.6V
• Features of RWK10: Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High-Grade Twisted Pair of 100% Copper RCA Cable, 17′ 10 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable, 17 16 Gauge Clear Speaker Wire, 3′ 10 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder, 40 Amp ATU Inline Fuse, 7 Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets, Soft abrasion proof insulating jacket allows for 100% improved flexibility, PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

• Rockville RBG15S 15 inch 1600 Watt Active Powered PA Subwoofer; 400 Watts RMS – 800 Watts Program – 1600 Watts Peak Power; 15-inch Woofer with 70oz Magnet and 3 inch Voice Coil
• Frequency Response: 40HZ-2000HZ; Adjustable Crossover Control: 45HZ-500HZ; Maximum SPL on 1w – 1m: 120dB Peak – 115dB Continuous; DSP
• Digital Signal Processor with Boost for Extended Low-Frequency Control; Power-On and Signal Input LED Indicators; Signal Input LED Indicator; Clip Limiter Circuitry with LED Indicator; Balanced XLR and TRS input jacks
• Balanced XLR thru-output jacks for parallel connections; Passive heat sink with heat-sensitive variable speed auto turn-on fan for cooling; Subwoofer Level Adjustment; Subwoofer Phase Control
• Built-in pole mount socket; Built-in carrying handles; Custom metal grill; Durable black carpet with black metal corners; 7-layer Birch 5.8 inch plywood baffle construction; Aluminum former voice coils with copper winding

• Rockville DV12K6D2 Dual 12″ 4800w Car Audio Subwoofer w Plexi Sub Enclosure Box. Final Impedance: 2 Ohm. Peak Power Handling: 4800 Watts. Continuous RMS Power Handling: 1200 Watts.
• 1” MDF where the subs are mounted. Made with Sexy-Plexy! Plexiglass front panel. LED with selectable colors (white or blue selectable) (The LEDs were designed to have a professional look for a show car).
• Show ready enclosure! We were given the challenge by our team to develop the nicest enclosure in the history of car audio and this is what we came up with. We hope you all love it!
• Bonded stapled and braced and it is strong as a beast. Vented enclosure (side firing). Pre-wired down to a 2-ohm final impedance.
• Copper push terminals. Vent dimensions: 1.77″ x 11.57″ x 15.75″. Tuning frequency of enclosure: 35 .6Hz. Dimensions: 15.2” H x 32.01” W x 12.6 or 15.75” D (the rear of the enclosure is sloped so the depth is different on the top and bottom)