Sewing Homes

Top 10 Best Glue For ABS Plastic 2022 – Review & Guide

Last Update:

You can trust our selection for Glue For Abs Plastic Reviews. Because We have worked hard studying and analyzing 51927 reviews for Glue For Abs Plastic and rating them. It was a difficult job to list only ten products for Glue For Abs Plastic where thousands of them available online. I hope it will help you to take final decision for Best Glue For Abs Plastic.

Best Glue For Abs Plastic
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1Permatex 84145 Permapoxy Black Plastic Weld - 0.84 fl. oz9.6Buy On Amazon
2J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml9.4Buy On Amazon
3J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz9.4Buy On Amazon
4Weld-On 10244 773 ABS Medium-Bodied High Strength Solvent Cement - Fast Setting and Low-VOC9.4Buy On Amazon
5Plastruct Plastic Weld w/applicator 2oz Bottle9.2Buy On Amazon
6Oatey 30889 Medium Bodied Solvent Cement9.2Buy On Amazon
7J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Translucent Yellow - 25 ml9Buy On Amazon
8Loctite 681925 Super Glue Plastics Bonding System8.8Buy On Amazon
93M Scotch-Weld Plastic & Rubber Instant Adhesive PR408.8Buy On Amazon
10Strongest Glue by HG POWER GLUE Industrial cyanoacrylate ca Adhesive - Heavy Duty Glue for Plastic - Repair Car Boat Model Airplane DIY Plastics PVC Rubber Ceramic Woodworking Steel Metal Pottery8.8Buy On Amazon

Comparison Chart for Best Glue For Abs Plastic

In this article we've included our suggestions for the Glue For Abs Plastic after analyzing 51927 reviews.

Table Of Content:

Top 10 Best Glue For ABS Plastic 2022 – Review & Guide. If you are looking for glue for abs plastic then this review article may help you.

1. Permatex 84145 Permapoxy Black Plastic Weld – 0.84 fl. oz

  • Structural adhesive designed for general purpose bonding of a wide variety of materials
  • Forms a tough, durable bond with a permanent strength up to 3500 PSI
  • Fast-curing product sets in five minutes at room temperature
  • Bonds most plastics, composites, ceramics, and wood in any combination
  • Gap filling to 0.125 inches

2. J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe – Black – 25 ml

  • J-B WELD PLASTICBONDER (Black): A quick setting and multipurpose two-part urethane adhesive & gap-filling system that provides a strong and lasting bond to many plastic surfaces J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • CURE AND SET TIME: After mixing the two-part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure J-B Weld PlasticBonder set and cure color is black.
  • STRENGTH: J-B Weld PlasticBonder has a tensile strength of 3770 PSI
  • SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics, and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy-duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

3. J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty – 2 oz

  • J-B WELD PLASTIC WELD: A hand mixable two-part epoxy putty stick that is formulated to repair and rebuild various plastic compounds and surfaces.
  • CURE AND SET TIME: After kneading the two-part formula together by hand, PlasticWeld takes 25 minutes to set and cures in 3 hours.
  • PRODUCT FEATURES AND STRENGTH: J-B Weld PlasticWeld has a lap shear strength of 600 PSI.
  • APPLICATIONS: ABS, PVC & CPVC pipes and plastics, auto bumpers and trim, vinyl surfaces and siding, marine repairs & fiberglass parts, plastic water tanks, and plumbing.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
  • Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC, and CPVC
  • Bonds instantly
  • Superior strength
  • Will not shrink or pull away
  • Rebuild automotive trim, fiberglass parts, and vinyl siding

4. Weld-On 10244 773 ABS Medium-Bodied High Strength Solvent Cement – Fast Setting and Low-VOC

  • Medium-bodied, fast-setting, low-VOC ABS cement for all classes and schedules with interference fit through 8″ (200 mm) diameter.
  • Medium-bodied, high-strength black ABS cement applies smoothly and sets quickly
  • The low-VOC formula reduces solvent emissions for a better working environment
  • Compatible with all rigid ABS pipes and fittings up to 8 inches
  • Meets SCAQMD Rule 1168/316A, ASTM D2235, NSF/ANSI 14, performance specifications; contributes toward satisfying Indoor Environmental Quality credits (IEQ credit 4.

5. Plastruct Plastic Weld w/applicator 2oz Bottle

  • 2 Oz.
  • PLASTIC WELD SOLVENT CEMENT
  • Immediately tacky
  • Sets in minutes
  • Permanently bonds ABS to Butyrate, ABS to Styrene, ABS to Acrylic, and more.

There are also related topics that you may like to choose the Best Boat Battery Charger, Best 12V Air Compressor 4WD, and the Top 10 Best ATV Light Bar

6. Oatey 30889 Medium Bodied Solvent Cement

  • O.
  • For all non-pressure applications
  • Meets ASTM D2235
  • Recommended application temperature 40°F to 110°F/ 4°C to 43°C
  • Medium-Bodied Black cement for use on all schedules and classes of ABS pipe and fittings up to 6-Inch diameter with an interference fit.
  • O.
  • For all non-pressure applications
  • Recommended application temperature 40°F to 110°F/ 4°C to 43°C
  • Meets ASTM D-2235

7. J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe – Translucent Yellow – 25 ml

  • J-B WELD PLASTIC WELD: A quick setting and multipurpose two-part epoxy that provides a strong and lasting bond on various plastic surfaces (Plastic & PVC, Fiberglass, Glass, ABS, Composites, and Vinyl).
  • CURE AND SET TIME: After mixing the two-part formula with the included mixing tray and stir stick, PlasticWeld takes 5 minutes to set and 1 hour to cure.
  • STRENGTH: J-B Weld PlasticWeld has a tensile strength of 3900 PSI.
  • SURFACE APPLICATIONS: Plastic & PVC, Fiberglass, Glass, ABS, Composites, and Vinyl.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.

8. Loctite 681925 Super Glue Plastics Bonding System

  • Repairs any plastic guaranteed
  • Quick, neat, and easy
  • No mixing required
  • 2 grams
  • Carded
  • Use for repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals, and O-rings.
  • Bonds leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber, and hard plastics such as Plexiglas, polycarbonate, polystyrene, and PVC.
  • Sets in seconds and dries transparent
  • Easy to apply – no mixing
  • 2-gram tube of bonder with 4mL activator
  • When mixed in equal volumes, the components react to produce a tough, rigid, high-strength bond in 20 to 25 minutes.
  • Loctite Epoxy Plastic Bonder does not shrink and is resistant to water, most common solvents, and shop fluids.
  • It has high impact resistance and can be sanded and drilled.
  • Recommended for bonding substrates such as PVC, polycarbonate, acrylic, ABS, FRP, Nylon, Mylar, Delrin, phenolic, aluminum, and stainless steel.

9. 3M Scotch-Weld Plastic & Rubber Instant Adhesive PR40

  • Bonds to a number of substrates, including plastics and rubbers
  • Precise application: pinch container for a precise drop or squeeze for a steady bead
  • Low viscosity adhesive is easily applied from the bottle
  • Strong, durable and long-lasting bond on a variety of substrates
  • Fast curing to keep projects moving quickly

10. Strongest Glue by HG POWER GLUE Industrial cyanoacrylate ca Adhesive – Heavy Duty Glue for Plastic – Repair Car Boat Model Airplane DIY Plastics PVC Rubber Ceramic Woodworking Steel Metal Pottery

  • CONVENIENT STORAGE – 1 adhesive system, 4 application options: can be stored in refrigerator/freezer for 1-2 years or longer; use for bonding, strengthening, modeling, filling.
  • HG POWER GLUE BONDS NEARLY MATERIALS – plastic, wood, rubber, glass, metal, aluminum, ceramics, stone, etc.
  • IDEAL GLUE FOR A HOST OF APPLICATIONS – a crack in the bumper or motorcycle fairing, a broken headlight bracket, torn RV paneling, or simply an instant fix for your child’s favorite toy.
  • SAVE TIME AND MONEY – Nearly all household items can be salvaged quickly at an affordable price.
  • SUPERIOR BOND STRENGTH – Welding Glue from the bottle is unparalleled in its performance and, due to its unique combination of powder and glue, achieves significantly better bonds than standard glues.

Glue For Abs Plastic Buying Guide


Does the thought of finding a great Glue For Abs Plastic stress you out? Has your mind been juggling between choices when it comes to buying Glue For Abs Plastic in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Glue For Abs Plastic for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Glue For Abs Plastic Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Glue For Abs Plastic in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Glue For Abs Plastic currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Glue For Abs Plastic brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Glue For Abs Plastic based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Glue For Abs Plastic before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Glue For Abs Plastic they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Glue For Abs Plastic, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Glue For Abs Plastic before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Glue For Abs Plastic will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Glue For Abs Plastic if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Glue For Abs Plastic on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Glue For Abs Plastic on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Glue For Abs Plastic featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top